List Price : $259.99 Price : $129.99
Product Description
Universal Effects Pedal Floor Board with Integrated Power Supply
Amazon.com Product Description
Love your pedal chain? Rather than tossing your effects and their individual power adapters into a duffel bag after a gig, keep them safe--and ready to rock at a moment's notice--with the PB1000.
 This pedal board makes hooking up 12 pedals as easy as hooking up just one. Click to enlarge. |
 Heavy-impact plastic protects your pedals from the rigors of the road. Click to enlarge. |
It's All About Connections
This pedal board makes hooking up 12 2.5" x 4.5" pedals as easy as hooking up just one (of course, if you're using pedals that aren't 2.5" x 4.5", the snug foam padding can be cut to accommodate pedals of varying shapes). The PB1000 includes 1/4-inch patch cables, so you can leave your pedals connected to one another, ready to pass signal even when you're transporting them. It also comes with 1 x 12 daisy chain cabling so that when you plug in the 1.7 A power adapter, all your pedals receive power.
The Ins and Outs
Connect your guitar, bass or keyboard to the single 1/4-inch input in the upper right corner of the board. A pair of 1/4-inch jacks in the upper left corner allow you to connect stereo effects, and two 1/4-inch jacks send a left and right stereo signal to up to two amps. When it is time to load out, just unplug the power supply, disconnect your guitar and amp, put the lid back on the PB1000 and slide the locking latches back into place.
Pedal Protection
The PB1000 is made of heavy-impact plastic, a casing that will protect your pedals from the rigors of the road, including heavy impacts.
What's in the Box
Behringer PB1000, User's Manual
- Ultra-compact and lightweight pedal board for transporting up to 12 effects pedals
- Generous 1.7 A power adapter included for powering more than 12 devices* - includes all cabling
- Ultra-rigid plastic design withstands even heavy impact
- High-quality components and exceptionally rugged construction ensure long life
- Pedals link together to make it very easy to use
Behringer PB1000 Universal Effects Pedal Floorboard Reviews
| 17 of 18 people found the following review helpful:  Good value for the price - Noisy, though, By Amazon Verified Purchase This review is from: Behringer PB1000 Universal Effects Pedal Floorboard (Electronics) This is an inexpensive pedalboard, costing about 1/2 to 1/3 as much as some of the others. It sets up easily. I do not have any Behringer components, but it fits the small Boss units in the standard slots. They do not provide extra foam for oddly-sized components, of which I have several. For my MXR flanger, Green Screamer, Morley pedal, and MXR Noise Gate I had to cut out custom foam inserts. I found the foam at mcmaster.com. When closed, the case provides good protection for the pedals, which was my main reason for buying it. Unfortunately the Morley pedal doesn't fit when the case is closed, so I still have some fussing to do to get set up, but it is much better than before when I had all of the pedals thrown into a bag. The biggest problem with this arrangement is that it is NOISY, especially when using a compressor or the Green Screamer. I suspect that the noise is coming from a ground loop, which is not uncommon in pedalboards, when several... Read more 9 of 10 people found the following review helpful:  Behringer Pedal Board PB1000, By This review is from: Behringer PB1000 Universal Effects Pedal Floorboard (Electronics) This Pedal Board is really very nice. Not only do you get the durable case and the daisy chained power supply cable but you also get all the 1/4" mono plugs to hook up all 12 pedals. Connecting all 12 pedals is a breeze. I own many Behringer pedals and it can definietly power all up simultaneously. It's good to note that; if you own Boss pedals as well, the PB1000 cutout(footprint) will accommodate those pedals as well. I'm not sure about the Ibanez pedals, but I believe their footprint is very similar to the Boss & Behringer. A few of the Behringer Pedals suck a lot of power so you can go thru batteries very quickly. The TU100, Digital Delay, and Digital Reverb use more current so the draw on the battery is greater than say a TO800 Tube Overdrive and therefore the battery is dead within 2-3 hours of playing. Nice to use the pedal board with the power supply and not worry about having a spare 9V battery. The construction on the case is pretty solid,... Read more 8 of 9 people found the following review helpful:  Bang for the Buck!, By Amazon Verified Purchase This review is from: Behringer PB1000 Universal Effects Pedal Floorboard (Electronics) I almost spent my $100 on a Duncan Power Brick but decided to give this thing a try...I'm glad I did. It's got more power than the brick...and the advantages should be obvious. Aside from taking up a bit more floor space than I envisioned (this thing holds up to 12 pedals) I love it. I've never been big on using pedals but when I bought a compression/sustain pedal and a tuner and started using them regularly, the specter of constantly buying batteries loomed large. Once I got it I dusted off my old Boss Chorus, my Duncan Wah my Boss Loop Station bought a multi-fx pedal and a noise reducer...It's almost full now and I am enjoying using the toys without having to trip over them or unplug them all every time to avoid killing batteries. Best of all, I can "put a lid on it" and move them all, still connected, anywhere I want. The unit works flawlessly and the wiring "daisy chain" gives you lots of flexibility in wiring everything together. Best $100 I've ever... Read more |
› See all 14 customer reviews...
